Description

Bicycle Computer Speedometer Headlight Night Riding Wireless Code

A: Why do some buyers comment that the code table data is inaccurate?
Q: To sum up your situation, mainly from the following three points
1. The transmitter is not installed as required, and the received signal is unstable.
2. The corresponding parameters are not set properly. Such as circumference, weight, unit (km/mile)
3. There is strong magnetic field interference in the surrounding environment, such as high voltage, large motor and so on. When you leave the current scene, you can return to normal.
Instructions for use
Long press the power button for 3 seconds, the host starts up, and the code watch starts to work.
Click again, the headlight single light 100% brightness, the screen headlight icon display first gear.
Click again, headlights double lights 100% brightness. The onscreen headlight icon shows second gear. With no movement in this gear for 30 seconds, brightness decreases to 60%. Move to 100% brightness again
Click again, the headlight double lights 60% brightness, the screen headlight icon shows three gears.
Click again, the headlight dual flashing mode, the screen headlight icon shows four stops.
Press again, the big light is off, and the code watch is always on
Under any gear, long press the key for 3 seconds, the stopwatch and headlight are turned off, and the screen is not lit.
Turn on state, do not move for 4 minutes, the screen enters the standby state. Only the clock and battery are displayed
When charging, the electricity display is moving like water, and the lightning icon is displayed.
The backlight on time is determined by the set clock,18:00-6:00, there is a button operation, the backlight on 15 seconds of single mileage and single time to record the data of this ride, please turn off the main engine and then turn on the main engine during each ride, the data will be cleared.
Press and hold down the SET and MODE keys for 10 seconds, and all the numbers on the display will light up, and factory Settings will be restored.
Five kinds of speaker sounds are optional. Hold down the speaker button on the extension cable control for 8 seconds to switch the sound. The light button on the extension cable control can be set.