Features:

- Designed to conform to the center channel and bead locking rim bed; - Creates an air-tight seal between the tire and rim bed; - Good stretch and seal, non-porous, will not affect tire fit; - Made of compound material, not as stiff as Nylon or Acrylic options; - Adhesive specifically formulated to adhere evenly for long lasting hold; - Does not leave a messy residue when it needs to be replaced; - Ultra light in weight, barely increase weight load for light biking; - Comes in length of around 10meters, enough for two wraps at a set of wheels.

Specifications:

- Item: Tubeless Bicycle Wheel Rim Tape - Backing film: Polyester; Tensilized strapping - Adhesive: Single sided; synthetic rubber adhesive - Type: Pressure Sensitive - Thickness: Approx. 0.12mm - Size: Width per order option - Length: Approx. 10 meters - Application: Clean rim bed with alcohol, tightly wrap rim bed 2×overlap at valve stem, and puncture hole for valve stem

Tape Length on Rim for reference:

1. 26 inch rim, D0.559m*3.14=1.76m (Circumference), around 2 meters needed for 1 rim including the overlap at valve stem 2. 27.5 inch rim, D0.584m*3.14=1.83m (Circumference), around 2.1 meters needed for 1 rim including the overlap at valve stem 3. 29 inch & 700C, D0.622*3.14=1.95m (Circumference), around 2.3 meters for 1 rim including the overlap at valve stem

Package include:

1 * Roll of tape

Features & Specifications - As casing tool applicable to both ISIS and square hole crank; - Manufactured of #45 carbon steel, accurately integral forming, smooth edges, no blurs; - With due heat treatment in production, tempered, hardness maintained; - Accurate threading provides easy engaging, no damage to cranks or B.B.; - Comes with optional cap to service ISIS or Square hole crank;Specifications: - Item: Bicycle Crank Extractor - Use: For both ISIS & square shape crank - Cap: 1 PC enclosed with the extractor (To service ISIS crank, the cap is needed; To repair square one, cap not needed) - Production: Integral forming, thermal tempered - Furnishing: Plated - Tool Applicable: 16mm spanner (Optional per order) - Size: Please refer to the graphics below - Net Weight: Approx. 135 gramsPackage included 1 * PC tool as per order option (Bottom Bracket or any other parts in the graphics are not included)

· As extended support to mount lamp, horn, speedometer, sound box etc. · Frame constructed by 100% new reinforced material, in-mold production · Comes with liner, fits tube Dia. 25.0-32.0mm · Fasten with hex bolt, brass nut; · Light weight, approx. 40 gram

Package Includes:

1 PC Handlebar Extended Bracket 1 PC Allen Key

Features

- 5 in 1 functions: Rear Light, Braking Light, Turning Light, Bell, Alarm; - Multi modes meet wide scope warning needs in cycling; - 2000mAH battery ensures long runtime 40-160hrs; - Optimized circuit and chips grant accurate performance; - Remote control offers easy & handy operation.

Specifications

- Item: Bicycle Rear Lamp - Function: Rear Light, Braking Light, Turning Light, Bell, Alarm - Light Source: LED, red light warning, yellow for turning singnal - Modes: 4 red light modes, 1 yellow mode (Double strobe) - Lamp Battery: 3.7V 2000mAH Li-polymer, runtime 40-160Hrs - Charging: 5V 2A, Type-C Port - Controller: 30-60meters; Battery: CR-2032 (Replaceable) - Lamp mount: Fits round tube Dia. 27.2-32mm - Controller mount: Fits round tube Dia. 22-23mm - N.T.: Approx. 169grams

Package Include:

As Per Order Option

Features and specifications:

- Both handy tools can be used on Aero/bladed spokes holding,effectively eliminate spoke twist while applying tension or building wheels.

Package includes:

Per Order option.